home *** CD-ROM | disk | FTP | other *** search
- Path: news.mel.aone.net.au!usenet
- From: mpa@iig.com.au (Mark P Allen)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: WarpEngine 3033 + 32Mb SIMM: problems...
- Date: 16 Apr 1996 14:42:04 GMT
- Message-ID: <926.6680T1415T1548@iig.com.au>
- References: <1996Apr12.185346.1@cc.helsinki.fi> <1219.6678T81T185@iig.com.au> <1996Apr15.022045.1@cc.helsinki.fi>
- NNTP-Posting-Host: cnsta03.iig.com.au
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP) *UNREGISTERED*
-
-
- On 15-Apr-96 12:20:45, ronkko wrote:
-
- >> instabilities. Using the (undocumented) utility "warpram" (supplied on the
- >> Warp Engine installation disk) early in my startup-sequence, the problem
- >> appeared to disappear. Worth a try anyway...
-
- r> Thanks for the hint, but it did not help in my case... WarpRam did run
-
- Sorry to hear it
-
- r> problem must be either at KickStart level in the OS or then in the
- r> hardware... Does MacroSystems have any idea about these problems...? It
- r> sounds unbelievable that a product marketed such a long time could still
- r> have a design flaw like this...
-
- The problem you report is very unusual, and, to my mind at least, suggests
- a fault with either the WARP or the system itself. Sorry I can't be of
- more help...
-
- Regards,
-
- Mark
-
- ---
- mpa@iig.com.au - Ph:+61-70-332930 - Cairns
- Wishful Vision - Fx:+61-70-332931 - Australia
- ---
-
-
-